_.USED CUT TO LENGTH LINES

Please review the specifications and let us know about your interest in this equipment we currently have available for sale.
Should you require any further information / clarification, please do not hesitate to contact us.
To inquire send e-mail to: info@steelmills.com


LINE No: 1.

Material: Carbon Steel
Strip Width: 2000 - 500
Strip Thickness: 12.5 Max - 3 Min
Coil weight: 20 ton
Line speed: 16 metres/min
Sheet Length: 9000 Max - 1500 Min
Multi Blanking Capacity: 4 Cuts in 10mm to produce a maximum of 3 blanks
Year of manufacture: Upgraded in 2001

Manufacturer: Bigwood/Bronx
Equipment:
Coil Storage
Coil car
Double Expanding mandrel
Snubber roll
Peelerv
Entry Pinch rolls and Pre Flattener
7 Roll Leveller with back up support rolls and entry and exit deflector
roll -150hp
Side guides
Lift Out Slitter - 45 Kw
Double Scrap Winders with Scrap Removal Trolley
Shear
Run out Conveyor
Side Stacking Chain Conveyor
Hydraulic equipment
Electrical equipment
Slitter Tooling


LINE No: 2.

Technical Data
Make Mariani
Type SCIN 17/50-21/40x1800
Year 1980/97

Strip width: 450 - 1.550 mm
Strip thickness: 0, 4 - 3, 0 mm
Material: Stainless steel
Coil weight: max. 15 t
Coil Dia.: max. 1.500 mm
Plate length: 500 - 6.500 mm
Accuracy: 1 mm at 2.000 mm
Speed: max. 50 m/min

Space requirement: approx. 10 x 50 m
Total weight: approx. 90 t
Working direction: right  left

The line consists of:
- Paper winder:
- clamping: pneumatic
- mandrel Dia.: max. 50 mm
- drive: 0,75 kw

Coil Car
- design: underfloor
- stroke: max. 800 mm
- transversal movement: 3 phase-current-motor
- driving power: 2,2 kw

Decoiler with pinch roll and shifting base plate
- mandrel Dia.: (with segments) 508/610 mm
- no. Of mandrel segments: 4
- expansion: hydraulic
- pinch roll unit: hydraulic
- pinch roll: not driven
- shifting: hydraulic
- shifting movement: +/- 100 mm
- drive: 3 phase-current-motor
- driving power: 1,5 kw

Coil opener with feeding table
- swivelling movement hydraulic

Pinch roll unit
- contact pressure (controllable): pneumatic
- drive (together with leveller): D.C. motor

Leveller I ( 6-hi )
- material thickness: 1,5 - 3 mm
- no. Of levelling rolls: 17
- levelling roll-DIA: 50 mm
- no. Of intermediate rolls on top / at the bottom : 9 / 10
- intermediate roll-DIA: 48 mm
- no. Of supports on top / at the bottom: 9 / 9
- adjustment of bottom supports: hydraulic
- height adjustment: 3 phase-current-motor
- swivelling adjustment: 3 phase-current-motor
- tilting adjustment: 3 phase-current-motor
- passline adjustment: 3 phase-current-motor
- drive: D.C. motor
- driving power: 30 kw
- spare rolls: 1 set

Leveller II ( 6-hi )
- material thickness: 0,4 - 2 mm
- no. Of levelling rolls: 21
- levelling roll Dia.: 40 mm
- no. Of intermediate rolls on top / at the bottom: 11 / 12
- intermediate roll Dia. 40 mm
- no. Of supports on top / at the bottom: 9 / 9
- adjustment of bottom supports: hydraulic
- height adjustment: 3 phase-current-motor
- swivelling adjustment: 3 phase-current-motor
- tilting adjustment: 3 phase-current-motor
- passline adjustment: 3 phase-current-motor
- drive: D.C. motor
- driving power: 22 kw
- spare rolls: 1 set

Belt conveyor
- drive: 3 phase-current-motor

Looping pit equipment
- swivelling feeding tables: hydraulic

Strip centering
- width adjustment: manual

Pinch rolls
- pinch roll Dia.: 142 mm
- drive: 3 phase-current-motor
- driving power: 7 kw

Length measuring system: Incremental

Shear with hold down device
- design: eccentric
- drive: 3 phase-current-motor
- driving power: 8 + 3 kw

Acceleration belt with pinch roll unit
- drive: 3 phase-current-motor
- driving power: 2,2 kw

Stacker with vertically adjustable roller table
- stacking height: max. 600 mm
- length adjustment: 3 phase-current-motor
- width adjustment: 3 phase-current-motor
- actuation of swinging beam: pneumatic
- height adjustment: 3 phase current-motor
- Driven pallet roller table: 3 phase-current-motor

Balance
- scales: analog
- weight: max. 3 t

Pallet roller table with banding device
- mode of operation: semi-automatic
- banding strip width: 19 mm
- banding head

Exit roller table for pick-up by crane

Electrical equipment: SIEMENS
- power supply: 400 V / 50 H
- voltage: 24 V
- control: SIEMENS S7

Hydraulics
- working pressure: max. 100 bar

Hydraulic equipment
- pump drives: 3 phase-current-motor
- driving power: 10 kw

Documentation (complete)

Please note:
The line was generally overhauled in 1997.
The control cabinets and pipings/cables were completely renewed, all wearing parts checked and if necessary renewed.
After overhauling the line was seaworthy packed (welded-in) and is since then out of use. After unpacking on our stock we can say that the condition of the Line is nearly as new.
We can submit you our offer for the assembly of the line, if requested separately against additional price.
All technical data are based on supplier’s information and therefore without obligation for us. The machines are subject to prior sale; this offer is subject to our General Terms and Conditions.

LINE No: 3.

Year Built: Around 1979
Coil: Prepainted steel, Galvanized steel, Cold
Rolled Steel, EGI, GA
Thickness: 0.25mm ~ 3.2mm
Width: Max 1700mm (1800mm?)
Coil Ton: Max 15 Ton
Line speed: Around 20 MPM
Cut Length: 700mm ~ 5 meter L

Production Capacity: Around 10 Coils x 7 Ton/ Coil = Around 70 Ton / 10 Hour Day

Composition of equipment
1) Uncoiler, Coil Car
2) Pinch Roll + Side Guide + Leveller
3) Conveyor
4) Up Cut Shear
5) Stopper measuring Length / Manual
6) Conveyor
7) Piler Manual
8) V.S 20 HP Motor


LINE No: 4.

Mild Steel Cut-To-Length Line
1.4 ~ 6mm t x 1350mm W x 20 Ton x 40 Cut/ Minute
Now Under Operation and Installed.
Built by Korean Make in 1989.

1. General Specification
(1)Thickness : 1.4mm -6mm
(2)Material : Hot rolled steel coil
(3)Tensile strength : 50%
Yield strength : 35%
(4)Width : 600-1350 mm
(5)Weight : 20,000 Lbs
(6)Inner dia : 508, 610, 762mm
(7)Out dia : 2000 mm
(8)Cutting length : 1000-6000 mm
(9)Cutting accuracy : Length ± 0.3 mm
(10)Number of cutting : 40cut/min(max)
(11)Line speed : 20 ~ 60MPM Max
(12)Line total length : 51,540mm

2. Detail Specification
1) Coil car & Coil skid
- Type of coil car : 4 wheel Coil car
- Loading Capacity : 20,000 Lbs
- Lifting coil : By Hydraulic cylinder
- Travelling method : By motoring(Geared Motor 3.7Kw)
- Type of coil skid : V-shape

2) Uncoiler
- Type : Double cone type(none expanded) - Loading Capacity : 20,000 Lbs/coil
- Out Dia. of drum : 508 , 610 , 762
- Centering coil : by Hydraulic cylinder
- Drive Motor : 5.5 x 6P
- Brake : Band brake by air cylinder
- Coil opener : Hydraulic wedge type
- Hold Down Roll : Hyd’Cylinder Down & Geared Motor Drive type

3) Rough leveller
- Type : 4 high-7Rolls, motor drive screw down control
- Work roll : Dia. 145×1430 L (upper3, lower4)
- Back up Roll : Dia. 155× 27ea (3ROW)
- Pinch roll : Dia. 234
- Lift cylinder of pinch roll : air cylinder
- Roll Up Down : Screw handlev - Roll Tilting : Screw handle
- Main Drive Motor : D.C 75Kw (850~2100RPM)

4) 1st Looping table
- Type : Tilting table with idle roller
- Length of table : 5050L x 2
- Tilting table method : Hydraulic cylinder
- Loop table : Photo tube switch

5) Side guide & Roll Stand
- Type : Vertical roll (Roll Opening : 450 ~ 1400)
- Guide-Upper roll size : Dia. 114.3×1700L
- Guide roll Size : Dia. 138 x 140L
- Guide roll adjust : open-close → by handle

6) Pinch roll& Side trimer,
- Pinch roll : Dia. 300
- Up-down method : Cylinder type

7) Scrap winder
- Type : Double drum type
- Drum size : Dia. 900 × 500W
- Drive : V.S motor

8) 2nd Looping table
- Type : Tilting table with idle roller
- Length of table : 5050L x 2
- Tilting table method : Hydraulic cylinder
- Loop table : Photo tube switch

9) Feeder Unit
- Composition
: Side Guide Stand, Pad stand, Measuring Roll stand,Pinch Roll stand
- Measuring roll : Lower roller type
- Measuring roll size : Dia. 127.32 × 400L
- Adjust method : Pneumatic cylinder pinch & feeder roll type
- Feeder roll up-down : By pneumatic
- Feed Roll Motor : D.C 30Kw

10) Stop up cut shear
- Number of cut : Max 40 cuts/Min
- Length Accuracy : ±0.3mm
- Drive Motor : DC 75 HP × 1150 RPM
- Cutting Length : 1000~6000mm
- Feed Roll Dia’ : Ф300mm
- Crank dia’ : 160mm
- Control type : NUSCO-100v
- Drive motor : AC 37 HP X 1,150 RPM
- Number of cut : 40 cuts/Min

11) No1 Run out Conveyor & Side Guide - 1 Set

12) Finish Leveler
- Type : 13rolls 4HI type (upper 6, lower 7)
- Pinch roll size : Dia. 200mm
- Pinch roll up down ; By pneumatic Cylinder(Ф125x100st)
- Work roll : Dia. 100×13ea
- Back up roll : Dia. 100mm×45ea x 3Row
- Back up roll Adjust : Crown adjust by hand
- Roll material : SUJ-2
- Upper roll up down adjust : by Geared motor
- Roll Tilting Motor : Geared Motor 2.2Kw
- Drive motor : DC 75 HP X 1,500 RPM

13) No2 Run out Conveyor
- Type : Belt conveyor type
- Run out length : 7643L
- Line Speed : Max 243.2MPM, Min 24.3MPM

14) Auto matic prime piler
- Type flying down type
- Stamping : Air cylinder push plate type
- Loading width : 450 - 1,250
- Loading length : 1,000 - 6,000
- Loading height : 1,000
- Loading weight : 6,000
- Lifter type : Cross link hydraulic elevation type
- Lifter table size : 1,400× 6,200L
- Table elevation : Hydraulic cylinder
- Carrying speed : about 10 MPM
- Carrying motor : 1.5 HP Geared motor

15) Electric equip
- Power : 440 volt
- Control : 220 volt

16) Hyd Unit : 70~140Kg/cm2

17) Air Unit : 4.5Kg/cm2